Government Access Control

Open a multitude of commercial gates and doors with a single remote. Universal radio receiver compatible with Delta, Multi-Code, and Stanley products.

• Single-channel commercial receiver
• 1x10 pole DIP, 3-position slide switch
• Units can handle both 300 and 310 MHz frequency
• Weather-resistant housing; suited for outdoor applications; quarter-turn screws for quick and easy programming
• 4 wired leads (3ft.)
• 1 NO relay related at 24V AC/DC at 10A

Open a multitude of commercial gates and doors with a single remote. Universal transmitter compatible with Delta, Multi-Code, and Stanley products.

• Single-channel remote control
• 1x10 pole DIP, 3-position slide switch, 1 SPST momentary
• Units can handle both 300 and 310 MHz frequency
• 9 volt carbon zinc battery included

RF Emergency access box system includes complete Click2Enter-I unit installed in polycarbonate enclosure, with security screws for door access, bit/key, mounting package, and "Operator's & Installer's" Guide.

DKS mounting posts are available in two distinct styles; architectural and standard. The architectural posts are typically used with the larger telephone entry systems while the standard posts are used with card readers, keypads and smaller access control devices. A dual-height style is also available for applications that have both vehicular and truck traffic using the system. This style mounting post provides two different heights to attach the access control device to. All mounting posts are finished in a baked-on enamel finish.

The model AK-11 is an exterior digital keyless keypad entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.

Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs.

The legendary TOUCH CARD® reader is one of Secura Key's major contributions to Access Control. Secura Key replaced unreliable reed switches and pickup coils with an array of self-calibrating Hall-Effect sensors, which read the polarity of magnetized locations on a Barium Ferrite card. The user places the card on a non-magnetic stainless steel plate, which eliminates the requirement for a card slot, and protects the circuitry from weather and vandalism. Extremely rugged weatherproof housings with high-security locks and steel mounting plates have kept these units in service for many years. They are still widely used in gate, parking, and telephone entry applications due to their reliability and simplicity.

The 26SA single-door card access control unit is fully programmable. Adding and deleting cards, and other programming functions are accomplished by using a special deck of programming cards, another Secura Key innovation. Nonvolatile memory retains programming after a power loss.

A remote open input allows the door or gate to also be controlled from a remote switch. The reader operates on low voltage AC or DC and consumes less than 100 milliamps.

The 26SA may be used with the Secura Key SecuRelay™, which allows the lock or gate control circuit to be remotely located for added vandal-resistance. Lexan® and metal surface housings and a flush-mount housing are available.